Next Three-in-one and four-in-one cribs "grow" with your child, providing an affordable way to furnish his bedroom as he moves from infant to toddler to child. If your crib is not convertible, you may be able to buy a conversion kit from the company. These are the basic steps you'll take to convert any crib to a toddler bed. Always follow the instructions in the manual that came with your individual crib, as instructions and crib parts may vary.
If your crib is not a convertible crib and was not intended to convert to a toddler bed, don't attempt to make it into a toddler bed! You will need an Allen wrench and a screwdriver for this project.
Don't use a power screwdriver!
Unscrew the four bolts that hold the stationary side of the crib in place. Remove the stationary side.
Move the crib's spring frame to the lowest level, if it isn't there already. Secure the frame with the same bolts and washers that were already holding it in place.
Mount the guardrail to the front panel of the crib. It doesn't matter where you attach the high part of the guardrail. Attach the guardrail using the bolts provided for this purpose.
These may or may not be the same bolts that you removed in step 1 [source: Once the toddler bed is assembled, re-tighten each screw [source: Do not over-tighten the screws and bolts, as this may cause breakage or distortion of the wood. If you're missing a part, don't try to substitute something similar.
Contact the manufacturer for a replacement part. If you want to convert the toddler or youth bed back into a crib, you may have to fill in the screw holes so the screws will thread properly.
Fingers crossed it means a longer nights sleep for me in the future! Flexa 5 in 1 Cot Bed The beautiful Scandi design of the Flexa 5 in 1 Cot Bed brings so much value for money with its awe-inspiring conversion capabilities.
An expert at a local hardware store can help you do this properly [source:
В© 2016 - 2018 Business_Blog. All rights reserved | Template by W3layouts